Experimental PIV study of turbulent flow control by means of a combination of a dimpled surface and blowing through dimples
Ключові слова:
Drag reduction; Combined flow control; Turbulent flow; Dimpled relief; BlowingАнотація
This study examines how turbulent flow control is affected by a dimpled surface and blowing through dimples. The flow properties over a dimpled surface under different blowing circumstances were examined using particle image velocimetry (PIV). Velocity and shear stress profiles were measured in the vicinity of the dimpled relief and smooth flat surface for various flow sections along its development direction and then compared. The results show that controlled blowing and surface dimples can successfully change the flow structure, lower turbulence, and improve aerodynamic efficiency. Finding the optimal blowing rate has important ramifications for automotive and aerospace engineering applications.
Посилання
. Shkvar Ye., Kandume J., Islam M., Kryzhanovsky A. Particle image velocimetry and numerical simulation of combined flow control techniques by dimples blowing, synthetic jets and leading-edge tubercles. The 9th Int. Conf. "Computer Hydromechanics" Inst. of Hydromechanics of the NASU, Kyiv. Ukraine, Oct. 1-2. 2024.
Ali M. Hamed, Ryan M. Gallary, Bailey R. McAtee, Localized Blowing for Near-Wake Flow and Vortical Structure Control in Turbulent Boundary Layers Over Periodic Two-Dimensional Roughness, https://doi.org/10.1115/1.4064103.
M. van Nesselrooij, O.W.G. van Campenhout, L.L.M. Veldhuis, B.W. van Oudheusden, F.F.J. Schrijer, Y.H.J. van Weersch. Drag reduction in turbulent boundary layers by means of dimpled surface.
Olaf W.G. van Campenhout, Michiel van Nesselrooij, Leo L.M. Veldhuis, Bas W. van Oudheusden, Ferdinand F.J. Schrijer, An experimental investigation into the flow mechanics of dimpled surfaces in turbulent boundary layers, Delft University of Technology, Delft, the Netherlands
