Automatic thermal stabilization of the electrolysis process
Ключові слова:
efficient energy in electrolysis, power maintenance in electrolysisАнотація
In this study, a control system based on ACS-712 and DS18B20 temperature sensor is designed for
controlling electrolyser power consumption. Power consumption is controlled by the PWM method by the data from two
sensors: current sensor ACS-712 and temperature sensor DS18B20 connected to Arduino Nano to reach desired power
consumption. There is a potentiometer to set needed voltage, also Arduino monitor will show us occurred errors.
Checking the operation of the device showed that this approach allows you to stabilize the mode of operation of the cell,
prevent it from overheating and ensure long and safe operation in a rational mode.
Посилання
O. Luhovskyi Research of methods for increasing the efficiency of producing oxygen-hydrogen mixture /I.
Nochnichenko, D. Kostiuk, A. Zilinskyi// Journal of the Technical University of Gabrovo, #58 (2019) I. – Gabrovo,
Bulgaria, pp. 33 - 37, 2019 p.
OneWire Arduino Library, connecting 1-wire devices (DS18S20, etc) to Teensy
https://www.pjrc.com/teensy/td_libs_OneWire.html.
DS18B20 Datasheet, PDF – Alldatasheet
https://www.alldatasheet.com/view.jsp?Searchword=Ds18b20&gclid=EAIaIQobChMI7oqruuuu6QIVyoSyCh3hnw
oKEAAYASAAEgKxXfD_BwE.
ACS-712 Datasheet, PDF – Alldatasheet
https://www.alldatasheet.com/view.jsp?Searchword=Acs712&gclid=EAIaIQobChMIy5zZuO2u6QIVwYSyCh1hD
QqeEAAYASAAEgIarfD_BwE.
Arduino Nano http://arduino.ru/Hardware/ArduinoBoardNano
